GEARTREE 1m Extension Longer Arm 2980

FALCAM GEARTREE Triangle Extension Arm Triangular shaped arm, only for the floor-to-ceiling stand, connected through two adapters, with two staggered expansion holes at the end, 30kg load capacity, non-adjustable length.   Used to hang heavy equipment such as professional lighting   Specifications   Color Silver White Material Aluminium Alloy Dimension 820*290*60mm Weight 1.7kg Packing Weight 1.9kg Parts Triangle Extension Arm*1 M6*20 Locking screw*2 M6*8 Stainless steel taper screw*2 H3 Hex Key*1 Magic strap*1  

FALCAM GEARTREE Full Motion Swivel Arm It is used to install 4-way pan, VESA mount adapter, 15.8mm stud with 1/4 or 3/8 screw, with air spring, vertical and horizontal expansion holes at the end, after adjusting the preload, realizing a wide range of arbitrary suspending. Load range: 2.0-9.0kg, Height adjustment range: about 30cm.   Specifications Color Silver White Material Aluminium Alloy Dimension 420*160*60mm Weight 1014.5g Packing Weight 1206.5g Parts Full Motion Swivel Arm*1 M6*20 Locking screw*1 M6*8 Stainless steel taper screw*1 H3 Hex Key*1 H5 Hex Key*1 Manual*1    

FALCAM GEARTREE Basic Extension Grip Arm With an extension hole at the end, and connected to adapters through a 15.8mm stud, can be stacked and used to extend various types of equipment to broaden the shooting range, but stacking usage will lengthen the torque and make the load range smaller. Stacking more than 3 is not recommended. One piece basic extension grip arm load weight range : 0-20kg。   Specifications Color Sliver White Material Aluminium Alloy Dimension 270*85*55mm Weight 358.2g Packing Weight 432g Parts Basic Extension Grip Arm*1 M6*20 Locking screw*1 M6*8 Stainless steel taper screw*1 POM Gasket (Diameter35 mm)*1 POM Gasket (Diameter 40 mm)*1 H3 Hex Key*1 Magic strap*2 Manual*1    

FALCAM GEARTREE Boom Arm With stainless steel spring overall and a small 1/4 screw interface ball head at the end,used to hang camera, microphone and other equipments. Height adjustment range: about 110cm. Length adjustment range: 0-180cm. Load range: 0.5-1.6kg.   Specifications Color Silver White Material Aluminium Alloy Dimension 460*100*60mm Weight 1.03kg Packing Weight 1.205g Parts Boom Arm*1 Spanner *1 1/4 to 3/8 Male Screw*1 3/8 to 5/8 Screw*1 Magic Strap*2 Geartree Manual*1

FALCAM Professional Studio Boom Stand with Casters Compatible with GEARTREE system accessories   Overview Five-section expansion and contraction Adjusted at will（The minimum working height is about 157cm, and the maximum working height is 470cm Meet any photography needs）   Steel pipe fixed lock knob（Metal telescopic fixed knob  Adjust height freely ）   Metal Caster Easy to move on （Move at any time, more efficient shooting    With brake, more safe and stable when used  Simple operation, stronger aluminum alloy material ）   Large-load bearing, sturdy and durable Middle rod support is more stable （The magic legs are made of more strengthening stainless steel and aluminumalloy ,all-metal structure. It can bear a weight of 40kg and suitable for all kinds of lamps,photography props etc. The middle rod can provide more stable supporting and the fixed knob on the leg tub can be adjusted.  Adjusted according to the shooting needs.    International standard interface （Applicable to almost all flashes and lamps on the market. ）   Angle adjustment  Strong bearing （Basic Extension Grip Arm adjustable handle can adjust 180 degrees, and the Vertical Flip Angle can be switched at will.  The angle can be adjusted at will to make lighting more convenient.）   Specifications Color Silver White Material Stainless Steel Dimension 160*20*14mm Weight 15.7kg Packing Weight 16.5kg Parts Extra arm*1 Studio Boom Stand*1 Casters*3 Spanner*2 Sandbag*1  

Camera modeling and high customization allows it to fit the camera perfectly, so that any buttons on the camera would not be blocked and battery removal would not be affected. Make shooting always easy.